Table of Contents
Advertisement
• Now select the language that you want Alexa to respond
to in the future.
• Open the Amazon Alexa app and, if necessary, enter your
access data once again. After that, you should find the
SIRIUM soundbar among your active devices.
• Then specify your personal settings (time zone,
device name, etc.) in the Amazon Alexa app. Further
information can be found at www.amazon.co.uk -> Help
and Customer Service.
Note
• Note that location-dependent information for queries
(for example, 'What's the weather?') will only be
accurate if the correct location information was
entered in the Alexa app.
• You can now use Alexa as described in Chapter 12.
7. Bluetooth
pairing
®
You can pair your terminal device with the soundbar via
Bluetooth
and use the soundbar as a playback device for
®
audio signals. You can control playback directly on your
terminal device or using the remote control. The volume
can also be controlled directly on the soundbar.
Note – Bluetooth
• Check whether your mobile device (smartphone,
tablet, etc.) is Bluetooth
• Note that the maximum range for Bluetooth
metres without obstacles such as walls, people, etc.
• The Bluetooth
connection may be disrupted by other
®
Bluetooth
devices/connections in the vicinity.
®
• It is only possible to connect the soundbar to one
terminal device.
• Note that compatibility depends on the supported
Bluetooth
profiles as well as the Bluetooth
®
being used. (See Technical specifications, operating
instructions of the terminal device in use)
• Make sure that your Bluetooth
is on and Bluetooth
• Activate the Bluetooth
[MODE] button (2) on the soundbar.
• Alternatively, press [ Bluetooth
control.
• The Bluetooth
status LED (7) begins to pulsate blue.
®
• Press and hold [MODE] (2) for about 5 seconds to
activate the pairing mode. The Bluetooth
begins to flash quickly.
• Open the Bluetooth
and wait until Hama SIRIUM4000ABT appears in the
list of Bluetooth
devices found.
®
• If necessary, start searching for Bluetooth
your terminal device.
• Select the Hama SIRIUM4000ABT soundbar in the list
of available devices and wait until the soundbar is shown
as connected in the Bluetooth
device.
• The Bluetooth
status LED (7) is now constantly lit blue.
®
• Start and control audio playback using the controls of
your terminal device or the remote control.
Note – Bluetooth
• Some terminal devices require a password in order to
connect to another Bluetooth
• If your terminal device requests a password for
connection to the speaker, enter 0000.
10
®
-capable.
®
-capable terminal device
®
is activated.
®
mode by repeatedly pressing the
®
] (13) on the remote
®
status LED (7)
®
settings on your terminal device
®
devices on
®
settings on your terminal
®
password
®
device.
®
is 10
®
versions
®
Advertisement
Table of Contents
