Control Setting - Kenmore 111.77106 Use & Care Manual

LED Control Panel
1 2
1. Timer Key 2. Fan Speed Selection Key
5. Mode Selection Key
Plug the power cord of the unit into a 3-prong wall receptacle. You will hear a
beep and the display screen will illuminate, showing digits for the surrounding air
temperature. Press the Power Key. The air louvers on the front of the unit will
open and the unit will begin operating in Cool mode. Press Up or Down key to
adjust Cool temperature setting. Press Mode key to toggle from Cool to Dry
(dehumidification) to Fan (fan-only) operation mode.
1 Timer Key – The Timer can be set from 1 to 24 hours in one-hour increments.
Shutoff Time – With power on, press the Timer key. Digits will start to flash in the
display and the Hr indicator will light. While display is flashing, press the up and
down keys to select the desired number of run time hours. After a few seconds the
temperature digits will display and the Hr indicator will remain lit. The unit will run
for the set time and then shut off.
Delayed Start Time – With the power off, press the Timer key. Digits will start to
flash in the display and the Hr indicator will light. While the display is flashing, press
the up and down keys to select the desired number of hours before startup. After a
few seconds the temperature digits will display and the Hr indicator will remain lit.
The unit will begin to run after the set number of hours has passed.
To cancel Timer settings press the Timer key twice in quick succession. The Hr
indicator will turn off.
The Timer can be set from 1 to 24 hours and the amount of time is adjustable by
one-hour increments.
2 Fan Speed Selection Key – In Cool and Fan mode, press the Fan key to select high
(F2) or low (F1) fan speed. In Dehum mode, the fan defaults to the lowest speed (F1).
3, 4 Up and Down Keys – Press the up or down key to adjust the desired cooling
temperature. While pressing Timer key, press up or down key to select the desired
shutoff or delayed start time span. Simultaneously press both keys to switch between
Celsius (°C) and Fahrenheit (°F).
5 Mode Selection Button – Press Mode key to switch between modes. With each
press, the mode indicator will light up in sequence from Cool ---> Dehum ---> Fan
Page 9
CONTROL SETTINGS
7 3 8
6. Power Key
4 5
3. Up Key 4. Down Key
7. Sleep Mode 8. Display Screen
6