Series - Delta LTL3000 User Manual

Series

Your measurements are stored in series. You can add, select, edit or delete series of measurements. First,
start by selecting 'Series' from the main menu. On the display, all your series are now listed on the left side
of the screen.
Select a series: Press the series on the list, you want to use – the series is now selected. You can now
continue with your measurements (switch to 'Measure' from the main menu) and the data will be linked to the
chosen series.
on the top bar to add a new series and write a name in the 'Name' field for
Add a new series: Press
your new series (use the keyboard on the touch screen). Press the return arrow to finish. The series is now
added, and you can continue with your measurements (switch to 'Measure' from the main menu) and the
data will be linked to the new series.
Edit a series: From the series list, select the series you want to edit and type the new name of the series in
the 'Name' field. When finished press return arrow, and the new name of the series is saved.
Delete a series: Press the series on the list you want to delete, then press on the top bar. The series
and associated measurement data are now deleted. Note: It is required that at least one series exists, thus it
is impossible to delete the last series.
13
LTL3000 User Manual / June 2020 DELTA