Clas Ohlson Coline B-198 Manual

Bathroom Scale
Please read the entire instruction manual before use and
save it for future reference. We reserve the right for any
errors in text or images and for making any necessary
technical changes to this document. If you should have any
questions concerning technical problems please contact our
Customer Services.
Safety
• This product is a precision instrument and should
be handled with care and protected from blows and
rough treatment.
• Place the scale in the same place every time you
weigh yourself.
• For accurate readings, the scale should be placed on
a hard, level surface. An uneven floor beneath the scale
can cause the readings to fluctuate.
• Weigh yourself without clothing at the same time of day,
preferably in the morning before breakfast. Place your
feet in the same place every time you weigh yourself.
• The displayed readings are rounded up/down to
the nearest 100 g.
• The scale can be cleaned using a damp cloth, if and
when required. Make sure that no moisture gets inside
the product. Never use solvents or strong detergents.
• Keep the scale away from water and splashes; otherwise
the electronic components can be damaged.
• Do not store the scale standing on its edge as the display
will be on all the time and drain the battery.
• Remove the battery from the scale if it is not to be used
for an extended period.
• The scale can be affected by changes in temperature
or by being moved. Inaccurate readings may occur if
the scale is too cold when used. Allow the scale to stand
and acclimatise for approx. 24 hours before using it for
the first time.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Art.no 34-1551 Model B-198

Product description

Digital glass topped bathroom scale.
Battery
• Remove the isolating plastic tab between the battery and
the battery holder before first use.
• Changing the battery: Carefully press the locking tab in
to release the battery cover and then remove the battery.
Insert a new battery (CR2032). Refit the battery cover.
• When the battery needs changing, "Lo" will appear on
the display.
Buttons and functions
1. [ UNIT ] Unit of measurement selector
2. Battery cover
Operation
1. Press [ UNIT ] to select the unit of measurement.
2. The scale should be placed on a level surface.
3. Stand carefully on the scale and stand still to allow your
weight to stabilize.
4. Your measured weight will show in the display.
5. The scale will turn off automatically after 10 seconds.
If the scale is overloaded "Err" will appear on the display.

Care and maintenance

Clean the product by wiping it with a soft, damp cloth.
Never clean the product using solvents or abrasive
cleaning agents.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.

Specifications

Weight capacity
Graduation
Batteries
1 2
ENGLISH
150 kg/330 lb
100 g/0.2 lb
1 × CR2032 (included)