8.
Lubrication of the machine
The lathe is to be lubricated every 8 hours of operation in accordance with the lubrication plan. The
lubrication points
■
Bed guide
■
Dovetail guide-Transverse skid
■
Dovetail guide-Longitudinal skid
■
Tailstock sleeve
Are lubricated with the help of an oil can and an ordinary lubrication oil by moving the skid or sleeve
backwards and forwards.
All other lubrication points are lubricated with a grease press at the designated lubrication nipples.
1
2
The spindle bearing does not need to be lubricated since the ball bearings have a closed
construction form and the bearings have been supplied at the factory with sufficient grease for the
lifetime of the machine.
every 8 hours of operation
every 8 hours of operation
25