Table of Contents
Advertisement
KNX – HITACHI VRF
®
IntesisBox
1 Description
Introduction
This document describes the integration of Hitachi VRF air conditioning systems into KNX home automation systems
using gateway IntesisBox KNX – Hitachi VRF.
The aim of this integration is to monitor and control your Hitachi air conditioning system, from your KNX TP-1 installation.
To do it so, IntesisBox performs as a one more KNX device, sending and receiving telegrams to group addresses in the
KNX network.
IntesisBox makes available the Hitachi air conditioning system indoor units' datapoints through independent KNX
objects.
Up to 64 indoor units supported, depending on product version.
This document assumes that the user is familiar with KNX and Hitachi technologies and their technical terms.
This information is subject to change without prior notice
IntesisBox is a registered trademark of Intesis Software S.L.U.
Ethernet TCP
Ethernet
configuration
USB
configuration
Integration of Hitachi VRF systems into
KNX control systems
User Manual r1.1 EN
email:
info@intesisbox.com
web:
www.intesisbox.com
phone: +34 938047134
5/30
Advertisement
Table of Contents
Need help?
Do you have a question about the KNX Series and is the answer not in the manual?
Questions and answers