Malfunction Table - BALAY 3HB469X Instructions For Use Manual

Malfunction table

Problem
The appliance does not work.
‹‹:‹‹ flashes in the clock
display.
A brief signal sounds while you are
making settings.
The oven door cannot be opened.
‹‹:‹‹ flashes in the clock
display.
The oven does not heat up or the
type of heating selected cannot be
set.
The oven does not heat up.
The O symbol appears in the clock
display.
”‰ appears in the display.
All manuals and user guides at all-guides.com
Possible cause
Blown fuse
Power interruption
Setting not possible
Power interruption
during self cleaning
Type of heating not
recognised
The oven is in
demo mode
Automatic switch off
has been activated.
The oven switches off.
Remedial action/notes
Look in the fuse box and check that
the fuse is in working order.
Set the current time using the rotary
selector and press the 0 button.
The setting made is not possible.
Correct the setting.
Set the current time using the rotary
selector and press the 0 button. Wait
until the cooking compartment has
cooled down. The H symbol goes out.
The oven door can be opened.
Set it again.
Switch the fuse off in the fuse box,
wait 20 seconds, and then switch it
back on again. Sometime within the
next two minutes, press and hold the
@ button for four seconds until the
O symbol goes out in the status bar.
Press any button. You can make
settings again.
39