Instructions For Safe Use; Figure 16 :: Labeling On The Sf02 - Lightware SF02 Product Manual

SF02
Laser rangefinder
! !

4. Instructions for safe use

!
The SF02 is a laser range finder that emits ionizing laser radiation. The level of the laser emission is Class 1M which indicates that
the laser beam is safe to look at with the unaided eye but must not be viewed using binoculars or other optical devices at a distance
of less than 15 meters. Notwithstanding the safety rating, avoid looking into the beam and switch the unit off when working in the
!
area.
!
CAUTION -- The use of optical instruments with this product will increase eye hazard.
The SF02 should not be disassembled or modified in any way. The laser eye safety rating depends on the mechanical integrity of the
optics and electronics so if these are damaged do not continue using the SF02. There are no user serviceable parts and maintenance
!
or repair must only be carried out by the manufacturer or a qualified service agent.
No regular maintenance is required for the SF02 but if the lenses start to collect dust then they may be wiped with suitable lens
!
cleaning materials. Make sure that the SF02 is switched OFF before looking into the lenses.
The SF02 should be mounted using the four holes provided in the circuit board. Do not hold or clamp the lens tubes as this may cause
! !
damage and adversely affect the laser safety rating.
!
Laser radiation information and labels
Specification
Laser wavelength
Pulse width
Pulse frequency
Peak power
Average power
Average energy per pulse
NOHD
! !
!
! !
! !
!
SF02 Laser Rangefinder - Product Manual - Revision 4
Product manual
Value / AEL
850 nm
< 30 ns
< 16 kHz
< 10 W / 15.96 W 50 mm aperture at 2 m
<0.6 mW / 0.78 mW 7 mm aperture
<0.15 nj / 200 nj
<15 m Distance beyond which binoculars with may be used safely
!

Figure 16 :: Labeling on the SF02

12 !
Notes
of ! 14
© LightWare Optoelectronics (Pty) Ltd, 2013