Summary of Contents for Paramount Fitness KLD4001X
Page 1
Item#: FP-293 Model#: KLD4001X OUTDOOR PROPANE FIREPIT OWNER’S MANUAL FOR YOUR SAFETY WARNING: For outdoor use only. If you smell gas: 1. Shut off gas to the appliance 2. Extinguish any open flame PLEASE retain this manual for 3. If odor continues, immediately future reference.
PACKAGE CONTENTS PART NO. DESCRIPTION Burner assembly Connector I Table Connector II Connector III Back panel Left panel Right panel Door stopper Knob Front panel Cylinder plate Cylinder plate tube Cylinder fixed bracket...
Page 3
M6 Nut Screw Screw Screw Washer Qty.15 M4x6 M6x12 M4x30 φ5 Qty.1 Qty.75 Qty.1 Qty.3 DANGER DANGER DANGER Solid fuels shall not be burned in this appliance.
Page 4
DANGER DANGER DANGER WARNING WARNING WARNING: For Outdoor Use Only WARNING WARNING...
Page 6
1. Attach Back panel (G) with leg (J) using 4pcs M6x12 screw (AA), Repeat it for Left panel (H) and Right panel (I) Screw M6x12 Qty.12 2. Attach the 2pcs Cylinder plate tube (O) with Left/Right side panel using 8pcs M6x12 screw (AA) Screw M6x12 Qty.8...
Page 7
3. Disassemble the M8x25 screw from cylinder fixed bracket (P), attached it to the Cylinder plate (N)using 3pcs M6x12 screw (AA) and M6 nut (DD). Then attach the plate to the bracket with 4pcs M6x12 screw (AA) Finally,attach the M8x25 screw to the bracket Screw M6x12 Qty.7 M6 Nut...
Page 8
5. Attach the front door(M) to legs using 4pcs M6x12 screw (AA) Screw M6x12 Qty.4 6. Attach connector II (E) to legs using 2pcs M6x12 screw (AA),repeat X 3 Screw M6x12 Qty.8...
Page 9
7. Attach connector I(C) to table (D) with 1pcs M6x12 screw(AA),repeat. Attach the 4 tables using 4pcs M6x12 screw (AA) Screw M6x12 Qty.8 8. Invert base. Attach the table to connect II(E) using 8pcs M6x12 screw (AA) and M6 nut (DD) Screw M6x12 Qty.8 M6 Nut...
Page 10
9. Attach the connector III(F) to table and legs with 3pcs M6x12 screw(AA), repeat X 3. Screw M6x12 Qty.12 10. Turn over onto legs. Attach the burner (B) to the table with 4pcs M6x12 screw(AA) and 4pcs M6 nuts(DD). Screw M6x12 Qty.4 M6 Nut Qty.15...
Page 11
11. Attach the knob (L) to the lid (A) with 1pc M4x6 screw (FF) and 1pc washer (CC) Install lid. Assembly is now complete. Screw M4x6 Qty.1 Washer φ5 Qty.1...
Page 15
fire pit. Holding in the control knob for more than 10...
IMPORTANT For questions, concerns or problems with our product please Si vous éprouvez des dicultés, ou si vous avez des questions ou des email our customer service department: préoccupations, prière de faire parvenir un courriel à notre Service à la clientèle customercare@jrhome.com customercare@jrhome.com DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE...