Table of Contents
Advertisement
User Guide
Set up your new ACN nbn™ Broadband service
Setting up your ACN nbn™ Broadband Service (Installing the Router)
Now that you have reviewed the check-list on page 1 you can proceed with installing your nbn™ Broadband service.
It's important to follow the steps below in the order indicated to ensure your new ACN NBN Service functions correctly.
Specifically, DO NOT plug the Router into a power socket until you are instructed to do so in Steps 3, 4 and 5.
Your ACN nbn™ pack contains the following items:
Ethernet cable
Your Router has been pre-configured to simply Plug'n'Play.
Step
1.
Connect one end of the provided Ethernet cable, to the BLUE port marked "WAN" on the back of the TP-LINK Router
1
Ethernet cable
Step
1.
Connect the other end of the Ethernet cable to the Ethernet port on the back of the NTD.
2
View from the bottom of a NTD
Step
1.
Connect the provided Power adaptor to the back of the TP-LINK Router in the port labeled "Power"
3
View from the bottom of a NTD
©2018 ACN Inc. All rights reserved
MKTG-89 - HFC - TP-Link WR841N - 13.11.2018
TP-LINK Wireless Router
ACN Pacific Pty Ltd
Power adaptor
WAN
TP-Link Router
Ethernet cable
Ethernet cable
ABN 85 108 535 708
Items You Need:
• Access to a power point near your NBN
NTD to power the TP-LINK Wireless
router
• If you wish to connect a device such as
a PC, Laptop, Smart TV, gaming console
or other device directly to the router
you will need an additional Ethernet
cable (not supplied by ACN).
WAN
TP-Link Router
Power adaptor
WAN
POWER
TP-Link Router
www.acnpacific.com
Page 2 of 8
Advertisement
Table of Contents
