Using The Set 840 S System; Switching The Transmitter On/Off - Sennheiser 502011 Instruction Manual

Using the Set 840 S system

To switch the Set 840 S system on, proceed as follows:
Sequence of steps
1. Switch your sound source (e.g. TV) on.
2. Adjust the volume on the receiver to a low level.
3. Switch the receiver on.
4. Adjust the desired volume on the receiver.
5. If necessary, set a different channel on the
transmitter.

Switching the transmitter on/off

To switch the transmitter on:
Switch your sound source on.
The transmitter automatically switches on. The opera-
tion indicator
If the transmitter doesn't switch on:
Read the corresponding chapter on page 26.
To switch the transmitter off:
Switch your sound source off.
The transmitter automatically switches off after
3 minutes. The operation indicator
B
lights up green.
Using the Set 840 S system
B
goes off.
Page
15
16
16
16
17
15