Connecting The Induction Loop Or Headphones For Hearing Aids To The Receiver - Sennheiser 502011 Instruction Manual

Putting the Set 840 S system into operation
Connecting the induction loop or headphones
for hearing aids to the receiver
5
The socket
• the supplied induction loop
• headphones or
• a connection cable to your hearing aid or to induction
couplers.
Connecting the induction loop
Carefully remove the clip
Attach the clip of the induction loop as shown.
Connect the induction loop
receiver.
Set your hearing aid to position "T".
If your hearing aid has no position "T", please contact your
hearing aid acoustician.
For alternative connection possibilities to your
hearing aid as well as the connection to cochlea
implants, please contact your hearing aid acoustician.
12
of the receiver allows you to connect
5
R
,
P
from the receiver.
R
to the socket
R
5
of the