Connecting headphones
Connect the 3.5 mm jack plug of the headphones to the
5
socket
of the receiver.
Wearing the receiver
In order to wear the receiver, you can use the supplied
Q
lanyard
, the clip
The induction loop is suitable for users of hearing aids, the
lanyard and the clip are useful if you are using headphones.
Wearing the receiver around the neck
If you want to wear the receiver around your neck, use
• the supplied lanyard
• the connected induction loop
To attach the lanyard
Connect the fasteners of the
Q
lanyard
at the rear of the receiver.
Wear the receiver around your
neck, with the Sennheiser logo
facing away from your body.
Putting the Set 840 S system into operation
P
or the supplied induction loop
Q
or
Q
:
to the metal ring
5
R
(where applies).
Q
R
.
13