Table of Contents
Advertisement
Searching for a sound source
Switch the receiver on.
The receiver automatically searches for one of the
3 channels of the transmitter and starts the channel
search on the last selected channel. If a channel is found,
the channel search stops.
Your hear the sound of the sound source found.
Depending on the channel found, the receiver produces
1, 2 or 3 beeps (see page 24) and the channel
1
indicator
The channel indicator
that the light won't disturb you in a dark room.
What if you don't hear the desired sound source?
The channel search has possibly found another sound
source (e.g. from another nearby system).
To continue the channel search:
Press
the
6
button
on the receiver repeat-
edly until you have found your
sound source.
If you still cannot find your sound source:
Change the transmission channel as described in the
next chapter.
Read the chapter "If a problem occurs ..." on page 26.
Changing the transmission channel
If several transmitters are operated simultaneously and are
very close to one another, reception can be subject to inter-
ference (e.g. hissing noise).
on the receiver lights up as follows:
1
channel
Using the Set 840 S system
goes off after 30 seconds so
search
6
17
Advertisement
Table of Contents
