If A Problem Occurs - Sennheiser 502011 Instruction Manual

If a problem occurs ...

If a problem occurs ...
The transmitter does not switch on
Possible cause
Is the mains unit
connected correctly?
Is the sound source
switched on?
Is the volume of
the sound source
sufficient?
You cannot hear anything
Possible cause
Is the transmitter
placed close to
metal objects?
Are all connectors
connected correctly?
Is the operation
B
indicator lit?
Is the volume of
the sound source
sufficient?
Is the volume of the
receiver sufficient?
Is the rechargeable
battery inserted
properly into the
receiver and fully
charged?
26
Solution
Check the connection of the mains
unit to the transmitter and to the
mains (see page 11).
Switch your sound source on.
Set the volume on your sound
source to a medium level.
Solution
Choose a different place for the
transmitter.
Make sure that the transmitter is
not placed close to metal objects.
Check the connection between the
transmitter and your sound source
(see page 7).
Check if the transmitter is switched
on (see page 15).
Set the volume on your sound
source to a medium level.
Increase the volume by turning the
volume control
Remove the rechargeable battery
and reinsert it into the receiver.
If this doesn't help: recharge
the rechargeable battery
(see page 20).
2
(see page 16).