Putting The Set 840-Tv System Into Operation; Setting Up The Transmitter - Sennheiser 502013 Instruction Manual

Putting the Set 840-TV system into operation

Putting the Set 840-TV system into
operation

Setting up the transmitter

Choose a suitable place near your sound source (e.g. TV).
Do not place the transmitter close to metal objects such
as shelf bars, reinforced concrete walls, etc. as this can
decrease the transmitter's range.
It is not necessary that the transmitter and stethoset
receiver are in the same room, so you can move around
freely in the home or outside in the garden.
When the stethoset receiver leaves the range of the trans-
mitter, it produces warning signals and then automatically
switches off after 3 minutes.
One transmitter can be used to transmit to several
stethoset receivers on the same frequency.
6