Selecting A Hearing Profile For Sound Enhancement - Sennheiser Set 860 Instruction Manual

Digital tv listening system
Hide thumbs Also See for Set 860:
Table of Contents

Advertisement

Using the Set 860
Activated
hearing
Hearing profile
profile
No LED segment lit
Hearing
profile 1
st
1
LED segment lit
Hearing
profile 2
nd
2
LED segment lit
Hearing
profile 3
rd
3
LED segment lit
24 | Set 860

Selecting a hearing profile for sound enhancement

The hearing profiles allow you to alter the sound of the audio signal
in order to improve the speech intelligibility and to adjust the sound
to suit your preferences. The profiles are used to specifically change
certain frequency ranges by e.g. boosting or attenuating low-fre-
quency or high-frequency tones.
All hearing profiles feature a compression function which compen-
sates for volume differences by boosting the volume of quiet pas-
sages and reducing the volume of loud passages if necessary.
The balance setting is saved on the stethoset receiver. If you
are using several receivers with a transmitter, the respective
receivers are optimally adjusted to match the personal hear-
ing preferences of the users (e.g. you and your partner).
Please note that the personal hearing preferences can only be
adjusted when only stethoset receiver is connected to the
transmitter.
Displaying the activated hearing profile
The activated hearing profile is not permanently displayed.
To check the activate hearing profile:
Switch the stethoset receiver on by putting it on (see page 19).
Briefly press the
2s
The currently activated hearing profile is displayed for 10 sec-
onds.
Sound enhancement
LED
The sound from the connected audio source
is reproduced unchanged.
Low-frequency tones are slightly boosted to
provide a warm, full sound.
High-frequency tones are reproduced less
piercing and clanking.
High-frequency tones are strongly boosted
to provide a crystal-clear sound, especially
for sibilants and high-frequency tones such
as twittering of birds.
Low-frequency tones are attenuated so that
they cannot mask high-frequency tones.
A graphic representation of the hearing profiles can be found
on page 40.
Hearing profile
button
on the transmitter.
Compression
no
yes
yes
yes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rr 800Tr 860Nt 5-10awSet 880Rr 880Tr 880

Table of Contents