Sonnet eGFX Breakaway Box Quick Start Manual page 3

GPU Card Installation Steps
WARNING:
When handling computer products, take care to prevent
components from being damaged by static electricity; avoid working
in carpeted areas. Handle PCIe cards only by their edges and avoid touching
connector traces and component pins. Also, avoid touching the box's circuit
boards and any of its components.
7. Remove the GPU card from its packaging, handling the card by
its edges and without touching any components or gold connector
pins.
8. Line up the card's connector with the PCIe slot, and then gently
but firmly press the card straight into the slot; do not rock the
card or force the card into the slot. If you encounter excessive
resistance, check the card's connector and the slot for damage,
and then try inserting the card again (Figure 4).
9. Connect the 8-pin auxiliary power connector to the card.
10. Secure the card using the previously-removed PCIe card bracket locking
plate, screws, and thumbscrew (Figure 5).
3
Figure 4
Figure 5