5. Slowly turn the dial on the
shower to position 2.
6. Pairing the shower to the Whale
®
Instant Match
transformer
• Press and release the start/stop button on the shower.
The status light on the shower will now flash blue to
indicate that the shower is in pairing mode.
• The status light on the shower will then flash white to indicate
that the transformer has successfully been paired to the shower.
• The Whale transformer will flash green only to indicate that it is
paired to the Mira shower
7. Completing the pairing
• Turn the temperature control to full cold and press the
Start/Stop button on the shower. The shower will now
return to normal standby mode.
• You may now follow the "Post Installation Procedure"
®
in the Mira
Advance Flex Extra Instruction Manual
(page 25) if necessary.