Whale INSTANT MATCH SDP134T Installation Manuallines page 13

2. Transformer set up
• Switch the mains electric supply to the transformer ON.
The light on the transformer will now flash red to indicate
®
that a Bluetooth wireless technology connection has not
yet been established.
• Press and hold the blue test button on the transformer until
the the light flashes red and green to indicate that the
transformer is now in pairing mode.
NOTE: You now have 120 seconds to pair the
transformer to the shower.
3. Shower set up
• Ensure that the electric supply to the shower
is turned OFF. Then turn the dial on the
shower to FULL COLD.
4. Configuring the shower
• Switch the mains electric supply to the shower ON.
• Within 10 seconds press and hold the Start/Stop button on
the shower. Until the Start/Stop light on the button goes off.
13