Operating Elements & Connections; Front Panel; Rear Panel - Omnitronic EP-220P User Manual

4
OPERATING ELEMENTS & CONNECTIONS

Front Panel

No. Element
1 POWER switch
2 Audio player
3 Memory card slot
4 USB port
5 AUX input
6 INPUT SELECT switch
7 LEVEL control
8 LOW and HIGH tone control
9 MIC LEVEL control
10 LOW and HIGH tone control
11 MIC IN input

Rear Panel

No. Element
12 LINE 1‒4 INPUT jacks
13 OUTPUT jacks
14 Voltage switch
15 Antenna connection
16 Power input
Function
Turns the unit on and off
• ► : play/pause (short actuation) and auto station memory (long actuation)
• V-/ und V+/ : previous/next title/station (short actuation) and volume
up/down (long actuation)
• MODE: selects the source (Bluetooth, SD card, USB or tuner)
For inserting an SD(HC) card
For inserting a USB storage medium
3.5 mm jack input for audio units with live level; when this jack is
connected, the audio player will be muted
Selects the signal source (LINE 1/2/3/4 or AUX 5)
Adjusts the overall volume
Adjust the low and high frequencies for the output signal
Adjusts the microphone volume
Adjust the low and high frequencies for the microphone signal
Microphone input jack (combination XLR/6.3 mm jack)
Function
Stereo RCA inputs for audio units with live level (e.g. CD player)
Unbalanced (RCA and 6.3 jack) and balanced (XLR) stereo outputs for
connection to units with line level inputs (e.g. active speakers or amplifier
Switches between 115 V and 230 V
Connection for the included antenna. Put the antenna in a vertical position
for FM reception
Used to plug in the supplied power cable
15