General Safety Instructions - LaserLiner AutoSmart-Laser Manual

Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.
Automatic rotary laser for horizontal and vertical levelling in
indoor and outdoor applications
– Accuracy 0.4 mm / m, 4° self-levelling range
– The 90° reference beam is provided to plumb and align partition walls
– Laser modes: spot, scan, rotary and hand receiver mode
– optional SensoLite 100: Laser receiver range up to 100 m radius

General safety instructions

– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures
or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014