Using The Timer As A Minute Minder - Belling CH302TX User Manual

Using the Timer as a Minute Minder

If you are not selecting any cooking zone
1. Make sure the hob is turned on.
Note: you can use the minute minder even if you're not selecting
any cooking zone.
If you don't start to select a minute minder duration time within 1
minute of switching the hob on, then the hob will switch off again
automatically.
2. Touch the timer control, then the timer indicator will flash "60" in
the display.
3. If you need to change or cancel the minute minder
duration time, press the clock key until the timer display
starts to flash again. While the timer display is flashing,
use the plus and/or minus key to adjust the minute
minder duration time. Adjusting the minute minder
duration time down to zero cancels the minute minder
function. Alternatively, pressing the plus and minus keys
together cancels the minute minder function quickly.
4. A few seconds after the last press of the plus or minus
key, the timer display stops flashing and the minute minder
duration time is accepted. The minute minder duration time
starts to count down in the display.
5. When the minute minder duration time has elapsed, the buzzer
will beep for 30 seconds and the time display shows "--".
Note:
• Touch the "-" or "+" control of the timer once to decrease or increase by 1 minute.
• Touch and hold the "-" or "+" control of the timer to decrease or increase by 10 minutes.
• If the setting time exceeds 99 minutes, the timer will automatically return to 0 minutes
11