Industry Canada Notices; Table 42: Ic: Rdl-3000-Rmg3 Recommended Safe Distances - Redline RDL-3000 Series Product Manual

RDL-3000-RMG3
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Information to Users @ FCC 15.21:
5.
Warning:
Communications could void the user's authority to operate the equipment.

5.1.2 Industry Canada Notices

Deployment in Canada
This Class B Digital apparatus meets all the requirements of the Canadian Interference-
Causing Equipment.
The following notices about deployment in Canada are included in training and
documentation provided to professional installers and operators of the final product:
The final product must be professionally installed.
1.
WARNING -- IC RF Exposure Warnings
2.
To satisfy IC RF exposure requirements for RF transmitting devices, the following
distances should be maintained between the antenna of this device and persons
during device operation:
Frequency (MHz)
To ensure compliance, operation at closer than these distances is not
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
The RDL-3000-RMG3 has been designed to operate with an antenna having a
maximum gain of 32 dBi. Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.
This device has been designed to ensure that radio frequency emissions are maintained
within the band of operation under all normal operating conditions listed in this manual.
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
This device may not cause interference, and
1.
This device must accept any interference, including interference that may cause
2.
undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than
that required for successful communication.
Users should also be advised that high-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars
could cause interference and/or damage to LE-LAN devices.
Déploiement aux le Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
70-00184-10-01
PRODUCT MANUAL
Changes or modifications

Table 42: IC: RDL-3000-RMG3 Recommended Safe Distances

Deployment
4900
5800
5800
Proprietary Redline Communications © 2017
not expressly
Separation Distance
PMP 270 cm (106.3") or more
PMP 20 cm (7.8") or more
PTP 240 cm (94.5") or more
approved by
Page 24 of 26 September 21, 2017
Redline