Fluke 87 V/AN Service Manual page 34

87 V/AN
Service Manual
Number
L
M
N
O
P
Q
R
--
bAtt
Replace the battery immediately.
diSC
In the capacitance function, too much electrical charge is present on the capacitor being tested.
EEPr
Invalid EEPROM data. Have Meter serviced.
Err
CAL
Invalid calibration data. Calibrate Meter.
Err
LEAd
WTest lead alert. Displayed when the test leads are in the A or mA/µA terminal and the selected
rotary switch position does not correspond to the terminal being used.
26
Table 14. Display Features (cont.)
Feature
The battery is low. XWWarning: To avoid false readings, which could lead
b
to possible electric shock or personal injury, replace the battery as soon as
the battery indicator appears.
A, µA, mA
Amperes (amps), Microamp, Milliamp
Volts, Millivolts
V, mV
µF, nF
Microfarad, Nanofarad
Nanosiemens
nS
Percent. Used for duty cycle measurements.
%
e, Me, ke Ohm, Megohm, Kilohm
Hertz, Kilohertz
Hz, kHz
Alternating current, direct current
AC DC
°C, °F
Degrees Celsius, Degrees Fahrenheit
Displays selected range
610000 mV
The Meter is in high resolution
HiRes
(Hi Res) mode. HiRes=19,999
The Meter is in autorange mode and automatically selects the range with the
Auto
best resolution.
The Meter is in manual range mode.
Manual
The number of segments is relative to the full-scale value of the selected
range. In normal operation 0 (zero) is on the left. The polarity indicator at the
left of the graph indicates the polarity of the input. The graph does not
operate with the capacitance, frequency counter functions, temperature, or
peak min max. For more information, see "Bar Graph". The bar graph also
has a zoom function, as described under "Zoom Mode".
0L
Overload condition is detected.
Indication
Error Messages