Table of Contents
Advertisement
The following messages appear to indicate other printer conditions or user intervention requests.
The list is in alphabetical order:
Message
COVER OPEN
CLOSE COVER
EJECTING
LOAD ASF1
LOAD ASF2
LOAD ASF3
LOAD LOWER PUSH
LOAD LOW.PUSH&MF
LOAD MANUAL FORM
LOAD PSH-PLL&MF
LOAD PUSH-PULL
LOAD UPPER PUSH
LOCKED MENU
MACRO CHANGING
MICRO FEED DOWN
↑
MICRO FEED UP
OPER. INTERRUPTED
PARKING
PATH CHANGING
PRESS A KEY
NVM CHANGED
QUIET PRINT OFF
QUIET PRINT ON
Description
When the printer cover is not closed correctly, the buzzer sounds and the
display shows alternately these two messages.
The printer is ejecting the paper out of the printer.
These messages are displayed when the corresponding paper path is out of
paper.
The printer displays only the messages related to the installed
devices.
LOW.PUSH&MF = Lower push and manual paper path.
PSH-PLL&MF = Push-Pull and manual paper path.
When the access to the Printer Setups has been locked at the power on,
the printer displays this message.
The macro has been changed and the printer is updating the settings.
↓
The paper is fed in microsteps downwards when pressing the arrow key.
The paper is fed in microsteps upwards when pressing the arrow key.
This message is displayed if the
park procedure.
The printer is parking the fanfold paper.
The path has been changed and the printer is updating the settings.
The NVM has been changed. Press any key to set the printer.
Printing at normal noise level.
Printing at reduced noise level
key has been pressed to interrupt a
SHIFT
23
Advertisement
Table of Contents
Need help?
Do you have a question about the 9078 plus and is the answer not in the manual?