Advertisement
Quick Links
Installation Guide
Issue 1, December 1999
IGD-201627-E01
Components
Make sure you have the following components before starting this installation procedure.
Aurora 5800 Spread Spectrum Digital Microwave Radio
Recommended antenna* and cable*
Flat-panel Antenna
(with installation instructions)
23.5 in.
Prepare the radio for a rack-mounting installation.
1
Microwave Communications Division - ISO 9001 Certified
N-type Cable
Includes
weatherproofing kit
* optional
NOTE: Harris
does not provide
grounding kits.
Rack Installation
Rack-mounting hardware
may be moved for "forward"
or "recessed" mount.
CAUTION! To prevent equipment damage and
shock hazard caused by lightning, antenna
installation and the grounding system must
comply with NEC or IEC standards, and local
regulatory requirements.
The following are supplied with the radio:
Reference Manual
Tools and test equipment you will need:
Voltmeter
T1 or E1 Test Set
Set of screwdrivers
Set of wrenches
Software
Advertisement
Related Manuals for Harris Aurora 5800
Summary of Contents for Harris Aurora 5800
-
Page 1: Installation Guide
Issue 1, December 1999 IGD-201627-E01 Components Make sure you have the following components before starting this installation procedure. Aurora 5800 Spread Spectrum Digital Microwave Radio CAUTION! To prevent equipment damage and shock hazard caused by lightning, antenna installation and the grounding system must comply with NEC or IEC standards, and local regulatory requirements. - Page 2 BER. There should be no errors over a 15-minute period. (See figure in box 4.) Data IN (Tx), Data OUT (Rx). www.microwave.harris.com/cservice/ USA 1-800-227-8332 Int’l (+1) 650-594-3800 Harris Corporation 350 Twin Dolphin Drive Redwood Shores, CA USA 94065 Copyright © 1999 Harris Corporation...
Need help?
Do you have a question about the Aurora 5800 and is the answer not in the manual?
Questions and answers