Hirschmann iVISOR mentor QVGA User Manual

Hirschmann iVISOR mentor QVGA User Manual

Hide thumbs Also See for iVISOR mentor QVGA:

Advertisement

iVISOR
mentor QVGA
User Manual
Edition 2/2009 Rev. A
The order code for this document is
24 183 19 1012e (Generic)
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
Contents
General Information
Important Notes /
Warnings
System Description
Configuration Setup
Information Menus
Commissioning /
Service / Maintenance
Troubleshooting
Appendix
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iVISOR mentor QVGA and is the answer not in the manual?

Questions and answers

Summary of Contents for Hirschmann iVISOR mentor QVGA

  • Page 1 The order code for this document is 24 183 19 1012e (Generic) © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 2: Table Of Contents

    Error code list ..................39 Appendix: Important notes for crane operators ........45 © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 3: General Information

    The manufacturer reserves the right to modify the contents of this manual without notice. Hirschmann offers no guarantee whatsoever for this material, including guarantees with reference to commercial availability and suitability for particular applications.
  • Page 4: Important Notes

    © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 5: System Description

    The contrast of the LC display is adjustable manually in accordance with ambient light levels. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 6: System Start

    In the event of a malfunction, a corresponding error code "E##" will appear on the Data display (1). (> refer to error code table) © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 7: Displays And Controls

    Introduction Displays and controls The illustration shows the displays and controls of the iVISOR mentor QVGA console. The numbers in the illustration correspond to the numbers in the following functional description for each item. Data display (background lit) Function keys F1 ... F4 Bar graph (utilisation) “Info"...
  • Page 8 You can find a detailed description of symbols and displays in the chapters and the appendix of this manual. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 9 In the “function key symbols" field, the symbol allocated to the relevant function key appears. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 10 By actuating the key the acoustic alarm can be suppressed after a minimum 5-second warning. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 11 This red warning light lights up when the switch-off function of the hoist limit switch has been manually bypassed. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 12 “LIM” key Key to set up working area limits. Refer to chapter 4.3 © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 13 System test, overload status, LMI system fault, and operating errors detected by the system. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 14: Status Displays

    Flashing: limit reached or exceeded. Constant: virtual wall monitoring active Flashing: limit reached or exceeded. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 15: Configuration Setup (Lmi Operation Mode)

    For easy operation, the computer guides the operator through the procedure step by step. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 16 Cursor to next position Cursor to previous position Confirm selection, go to next step > © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 17 Cursor to next position Cursor to previous position Confirm selection, go to next step © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 18 Cursor to next position Cursor to previous position Confirm selection, go to next step © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 19 The setup procedure is completed after confirmation. The normal operation screen is displayed. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 20: Quick Adjusting The Reeving

    Select reeving: (not with man basket operation) Increase value Decrease value Confirm reeving © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 21 The setup procedure is completed after confirmation. The normal operation screen is displayed. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 22: Adjusting The Language

    German for French switch to key level 2 for more languages © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 23: Working Area Definition System (Wads)

    ⇒ 4.4.1 ⇒ 4.4.2 ⇒ 4.4.3 ⇒ 4.4.4 ⇒ 4.4.5 refer to chapter: © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 24 Virtual wall monitoring 4.4.5 Go to previous key level back / end limit menu © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 25: Radius Monitoring

    The settings for programming the maximum boom radius are similar. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 26: Tip Height Monitoring

    (the last saved limit value is displayed) back to limits main menu © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 27: Boom Angle Monitoring

    The settings for programming the lower boom angle are similar! © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 28: Slew Angle Monitoring

    > © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 29 The settings for programming the right slew angle are similar! © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 30: Virtual Wall Monitoring

    (the previous stored walls will be displayed, if any) Go to previous key level back to limits main menu > © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 31 < example with 3 virtual walls © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 32: Information Menus

    (access is code protected) to software information screen back Digital in/outputs overview: back © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 33 Software information screen: scroll down scroll up back / end menu © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 34: Overview, Lmi Values

    LMI value overview Language selection back to key level 1 Overview, LMI values: back © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 35: Commissioning / Service / Maintenance

    Following any modifications to the mechanical structure or changes to the load suspension devices, your loader’s LMI calibration needs to be checked or corrected. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 36: Service Menus

    © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 37: Maintenance And Service

    If the system does not start as described, please notify customer service before you continue working. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 38: Troubleshooting

    If faults occur, please contact Hirschmann Service USA: www.hirschmann.com > USA > Electronic Control Systems > Contact - ECS. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 39: Error Code List

    Electronic component in the Replace sensor unit boom" measuring channel is defective © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 40 • • Angle potentiometer defective Replace angle sensor Fallen below lower limit © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 41 Error in the system defective. program • • Flash-EPROM defective Replace central unit © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 42 • Short circuit in a CAN Bus Replace Can Bus cable cable © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 43 Connect or replace cable to the (not with radio A2B) switch A2B switch © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 44 NOTE: If an error message not included in the above list is displayed, please contact Hirschmann Service USA: www.hirschmann.com > USA > Electronic Control Systems > Contact - ECS. © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com...
  • Page 45: Appendix: Important Notes For Crane Operators

    © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 46 © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 47 VDMA Fachgemeinschaft für Hebezeuge und Fördermittel im Verein Deutscher Maschinenbau-Anstalten e.V. Düsseldorf-Oberkassel © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 48 • making or breaking earth connections, • use of double-screened cables (guarded shield system). © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 49 © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
  • Page 50 LSQN V 1.11 (20090223) Graphics V 1.00 Application MQVGA V 1.00 (20090220) © 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.

Table of Contents

Save PDF