Related Manuals for Alemite 586 Series
Summary of Contents for Alemite 586 Series
- Page 1 User and maintenance instructions Cordless grease gun Model series 586 Battery charger included Date of issue July 2018 Form number 671087 Version...
- Page 2 Description Fig. 1 Cordless grease gun series 586 heading Model 586 grease guns are designed to dispense petroleum-based greases (NLGI 1/ NLGI 2) for general lubrication applications. A 36-inch (0.91 meter) long high-pressure whip hose, heavy-duty grease coupler, charger and molded carrying case are included.
- Page 3 Fig. 2 Exploded view of 586 Only suitable substitute 6304-B Coupler, grease. Item 25 must be removed when using this coupler. 340388 Relief valve with gasket. Support yoke during roll pin removal.
- Page 4 Illustrated parts breakdown list Item Description Part number Quantity Item Description Part number Quantity Insert, coupler Screw, tapping Washer, lock Yoke Screw, machine Pin, roll Housing Piston Hose, grease 340067 Battery, indicator Coupler, grease 308730 Battery connector Screw, M3x6 Washer, m3 lock Trigger Cover, head Cylinder, grease...
-
Page 5: Intended Use
Intended use 2.3 Do not expose power tools to rain or 3.6 Dress properly. Do not wear loose wet conditions. Water entering a clothing or jewellery. Keep your hair, These model guns are designed to dispense power tool will increase the risk of clothing and gloves away from moving petroleum-based greases for general electric shock. - Page 6 Residual risks 5 Battery tool use and care When assessing vibration exposure to 5.1 Recharge only with the charger determine safety measures required by specified by the manufacturer. Additional residual risks may arise when 2002/44/EC to protect persons regularly A charger that is suitable for one type using the tool which may not be included in using power tools in employment, of battery pack may create a risk of...
-
Page 7: Electrical Safety
Chargers Protecting the environment • Use your Alemite charger only to charge Separate collection. This product the battery in the tool with which it was must not be disposed of with supplied. Other batteries could burst, normal household waste causing personal injury and damage. -
Page 8: Specific Safety Rules
Hold hose at spring guard only. Do not Cartridge loading use if hose is damaged or worn. Inspect hose before each use. Use only Alemite 1 Unscrew grease cylinder (33) from the gun. 340067 grease whip hose. Use only 2 Pull the follower rod and engage the groove Alemite grease coupler 308730. - Page 9 Priming the gun Battery and Charger Safety CAUTION Rules Do not expose the charger to rain, snow, In most cases the gun will prime simply by or frost. operating the trigger several times. This manual contains important safety and Make sure the cord is located so that it Should grease fail to appear, air must be operating instructions for battery part...
-
Page 10: Battery Charger Operation
Battery charger Leaving the battery in the charger operation The battery can be left connected in the Charge the battery only with the charger charger with the green led glowing indefi- provided or optional mobile charger 343289. nitely. The charger will keep the battery fresh Make sure power circuit voltage is same as and fully charged. -
Page 11: Ec Declaration Of Conformity
EC declaration of EC declaration of conformity conformity Alemite, LLC Alemite, LLC 167 Roweland Drive, 167 Roweland Drive, Johnson City, Tennessee, USA, 37601 Johnson City, Tennessee, USA, 37601 Declares that under the sole responsibility Declares that under the sole responsibility... - Page 12 ® Alemite, LLC is a registered trademark. The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.