Volume Setting - Sega WORLD SERIES '99 Owner's Manual

Namoi kit version

Table of Contents

3 - 7 VOLUME SETTING

This page allows yo to adjust the volume settings used for the ANALOG STICKS and BAT MECHA.

PLAYER1

STICK-H HMAX (CO)

STICK-V HMAX (CO)

BAT

PLAYER2

STICK-H HMAX (CO)

STICK-V HMAX (CO)

BAT

SAVE AND EXIT

>EXIT

ADJUSTING THE VOLUME VALUE

For the 1P and 2P ANALOG STICKS, move each from the untouched position to the maximum position vertically and

horizontally.

For the 1P and 2P BATS, pull each from the untouched (face-up) position by about half of a turn until it stops.

Then, with the STICKS and BATS untouched, select SAVE AND EXIT and press the TEST Button to return to the

menu screen. This completes adjustments.

After adjustments, be sure to return to the INPUT TEST mode to verify that the values are normal. If they are not

normal, come back to the VOLUME SETTING page and readjust the volume settings. If the normal values are not

recovered after several retries, probably the BAT MECHA is faulty.

VOLUME SETTING

HMIN (50)

BMAX (CO)

BMIN (OC)

HMIN (50)

BMAX (CO)

BMIN (OC)

SELECT WITH SERVICE BUTTON AND

PRESS TEST BUTTON TO EXIT

NOW (80)

NOW (OC)

NOW (80)

NOW (OC)

Table of Contents