Related Manuals for Sega WORLD SERIES '99
Summary of Contents for Sega WORLD SERIES '99
- Page 1 1ST PRINTING JULY 99 WORLD SERIES ’99 OWNER’S MANUAL NAMOI KIT VERSION SEGA ENTERPRISES, INC. USA MANUAL NO. 999-0788...
- Page 2 Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workman- ship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating condi- tions.
-
Page 3: Table Of Contents
INTRODUCTION OF THE OWNERS MANUAL GENERAL PRECAUTIONS 1. ACCESSORIES 2. ASSEMBLY AND INSTALLATION 3. EXPLANATION OF TEST AND DATA DISPLAY 6-1 COIN METER SWITCH UNIT 6-2 TEST MODE 6-3 GAME TEST MODE 6-4 INPUT TEST 6-5 SOUND TEST 6-6 GAME ASSIGNMENTS 6-7 VOLUME SETTING 6-8 BOOKKEEPING 6-9 BACKUP DATA CLEAR... -
Page 4: Introduction Of The Owners Manual
MONITOR: INTRODUCTION OF THE OWNERS MANUAL SEGA ENTERPRISES, LTD., has for more than 30 years been supplying various innovative and popular amusement products to the world market. This Owners Manual is intended to provide detailed descriptions together with all the necessary installation, game settings and parts ordering information related to the WORLD SERIES ‘99 KIT, a new SEGA product. -
Page 5: General Precautions
General Precautions Follow Instructions: All operating and use instructions should be followed. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. - Page 6 Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other prod- ucts (including amplifiers) that produce heat.
-
Page 7: Accessories
THE SHIPMENT METHOD DESCRIBED BELOW ONLY APPLIES TO ‘MODEL 3’ BOARDS CONTAINED IN THE FOLLOWING GAMES: LOST WORLD, VIRTUA FIGHTER 3, SUPER GT, SEGA BASS FISHING, STRIKER 2, HARLEY DAVIDSON, RALLY 2, DAYTONA 2, DIRT DEVILS, HOUSE OF THE DEAD 2, CRAZY TAXI, ZOMBIE REVENGE, STAR WARS TRILOGY, WORLD SERIES ‘99... -
Page 8: Assembling And Installation
2. ASSEMBLING AND INSTALLATION Assembling should be performed as per the cabinet’s service manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunctioning to occur. When assembling, be sure to perform work by plural persons. Depending on the assembly work, there are some cases in which performing the work by a single person can cause personal injury or parts damage. -
Page 9: Explanation Of Test And Data Display
3. EXPLANATION OF TEST AND DATA DISPLAY By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. -
Page 10: Coin Meter Switch Unit
3 - 1 SWITCH UNIT AND COIN METER Never touch places other than those specified. Touching places not specified can cause electric shock and short circuit. Adjust to the optimum sound volume by considering the environmental requirements of the installation location. If the COIN METER and the game board are electrically disconnected, game play is not possible. -
Page 11: Test Mode
3 - 2 TEST MODE System Menu. This test mode mainly allows the IC board to be checked for accurate functioning, monitor color to be adjusted as well as COIN ASSIGNMENTS and GAME ASSIGNEMENTS to be adjusted. 1.) After turning power on, press the TEST button to have the following test item menu displayed. 2.) Press the SERVICE button to move the arrow. -
Page 12: Input Test
3 - 4 INPUT TEST This test displays the state of each switch. If this switch goes ON when activated, it is satisfactory. Display varies depending on the JOYSTICK TYPE setting in (3) GAME ASSIGNMENTS. INPUT TEST 1P_START :OFF 2P_START :OFF 1P_ABUTTON :OFF 2P_ABUTTON :OFF 1P_BBUTTON :OFF... -
Page 13: Game Assignments
3 - 6 GAME ASSIGNMENTS GAME ASSIGNMENTS GAME DIFFICULTY INNINGS 1 CREDIT 2 INNINGS FAVORITE EXTRA INNING ->EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT (A) INNINGS (FOUR SETTINGS LISTED BELOW This sets the number of innings that can be played in the VERSUS-COM mode. FOUR SETTINGS (listed below) I CREDIT 1 INNING... -
Page 14: Volume Setting
3 - 7 VOLUME SETTING This page allows yo to adjust the volume settings used for the ANALOG STICKS and BAT MECHA. PLAYER1 STICK-H HMAX (CO) STICK-V HMAX (CO) BMAX (CO) PLAYER2 STICK-H HMAX (CO) STICK-V HMAX (CO) BMAX (CO) SAVE AND EXIT >EXIT SELECT WITH SERVICE BUTTON AND... -
Page 15: Bookkeeping
(A) NUMBER OF GAMES 1P, 2P total game playfrequency. (B) SINGLE 1P GAMES Displays the total number of games played at 1P side (C) SINGLE 2P GAMES Displays the total number of games played at 2P side (D) DOUBLE GAMES Displays the number of games that two players began playing. -
Page 16: Backup Data Clear
3 - 9 BACK UP DATA CLEAR Clears the contents of BOOKKEEPING. When clearing bring-> to YES and when not clearing, to NO, by using the SERVICE SW and then push the TEST button. When clearing has been finished, COMPLETED will be dislayed. Pressing the TEST button will have the MENU return to the screen. -
Page 17: Troubleshooting
4. TROUBLESHOOTING Should trouble occur, first check connector connections. PROBLEMS CAUSE With Main SW Power is not supplied. ON, no activation Power supply/voltage is not correct. Irregular sound Greasing to gear mesh portion is not emitted from satisfactory, or extraneous matter inside Cabinet mixed in. -
Page 18: Control Panel/Bat Mecha 15~16
5. CONTROL PANEL/BAT MECHA In order to prevent an electrical shock, be sure to turn power off before performing work by touching the interior parts of the product. Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circuit accident. - Page 19 REMOVING AND ATTACHING THE BAT MECHA If you need to remove the BAT MECHA as in the case of a failure, open control panel base and remove the BAT MECHA through the following procedure. To reinstall the BAT MECHA, reverse the removing procedure, being certain that the BAT MECHA is faced in the correct direction.
-
Page 20: Game Board
6. GAME BOARD Ensure that the DIP SW setting is performed as designated. Failure to observe this may cause functioning not suitable for the operation of product, or malfunctioning. ASSY CASE NAO USA (840-0003D-01) : WORLD SERIES ‘99... -
Page 21: Parts List
7. PARTS LIST GRAPHICS/decals/stickers ITEM NO. ASSY CONTROL PANEL ITEM NO. 610-6723-4C01 PART NO. DESCRIPTION 999-0826 MARQUEE GRAPHIC MLB_WS99 KIT 999-0816 INSTRUCTION SHEET MLB_WS99 KIT 999-0817 CNTRL PNL OVERLAY MLB_WS99 KIT 999-0825 STICKER CABI SIDE L MLB_WS99 KIT 999-0825 STICKER CABI SIDE R MLB_WS99 KIT PART NO. - Page 22 XFMR 120V 17v2Ax2 560-5407 POWER AMP 2 CH 838-13616 SW REGU FOR JVS 400-5397 CONTENTS OF WIRING BAG SEEN ABOVE SPEAKER 1 SPEAKER 2 I/O Board 838-13683 *(USED FOR METER, COINDOOR, LIGHTS, ETC.) 5k pot 5k pot (sound) (sound) 1=WHITE/RED 3 2 1 2=GREEN/RED 3=YELLOW/RED...
- Page 23 ASSY SHIELD CASE NAO MLB_99 (840-0012D) ITEM NO. PART NO. DESCRIPTION 840-0001A-01 ASSY CASE NAOMI BD USA 840-0012C ROM CASE...
- Page 24 Come see SEGA ENTERPRISES’ Service Department Homepage...