Correct Weighing; Switching The Weight Display; Switching Off The Scale - Seca 684 Instruction Manual

Correct weighing

– Press the START key with no load on
the scale.
se(a 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and ready
to use.
– If necessary, switch the weight display
(see page 30).
– Stand on the scale and keep still.
Note
The maximum load on each individual
corner of the weighing platform is
200 kg.
– Read the weighing result off the digital
display.
– If a load greater than 360 kg or 800 lbs
is placed on the scale,
the display.
– To switch off the scale, press the
START key again.

Switching the weight display

The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be-
tween pounds (lbs) and stones (sts).
– Switch on the scale using the green
START key. Weight is initially displayed
in the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.

Switching off the scale

– To switch off the scale, press the
START key again.
30
0. 0
and appear con-
St0P
appears in