Kostal PIKO MP plus series Installation And Operation Manual page 31

Safety
Isolation principle
Grid monitoring
Residual current
monitoring
Protection class
Operating conditions
Area of application
Climate category i.a.w.
IEC 60721-3-4
Ambient temperature
Storage temperature
Relative humidity
Noise emission
(typical)
Equipment and design
Degree of protection
Overvoltage category
DC connection
AC connection
Dimensions
Weight
Communication
interfaces
Integrated DC
disconnector
Cooling principle
Test certificate
© 2018 KOSTAL Solar Electric GmbH
PIKO MP PIKO MP
plus 1.5-1 plus 2.0-1
No galvanic isolation, without transformer
Yes, integrated (the inverter cannot cause a DC residual
current due to the design)
Protection class 2 (RCD type A sufficient)
Indoors, outdoors (degree of soiling 3)
0 % to 100 %, non-condensing
Phoenix Contact SUNCLIX (1 pair), mating plugs included in
Wieland RST25i3 plug, mating plug included in the scope of
12.6 kg
RS-485 (1 x RJ45 socket: connection to Meteocontrol
WEB'log or Solar-Log™), Ethernet interface (1 x RJ45),
Modbus RTU (1 x RJ45 socket: connection to energy meter)
Yes, conform to DIN VDE 0100-712
Temperature controlled fan, variable-speed, internal
Refer to certificates download at the product page of
PIKO MP PIKO MP
plus 2.5-1 plus 3.0-1
Yes, integrated
4K4H
-25 °C to +60 °C
-30 °C to +80 °C
31 dB(A)
IP 65
III (AC), II (DC)
the scope of delivery
delivery
399 x 657 x 222 mm
(dust-protected)
homepage
EN
PIKO MP
plus 3.6-1
13.8 kg
31