Before The Installation; What Is In Your Package; System Requirement - Samsung MagicLAN SWL-2100N User Manual

2. Before the Installation

The following section will assist you in installing your wireless LAN Adapter successfully.
You will first install software (driver) and then will insert the SWL-2100P or SWL-2100N
wireless LAN card, and finally set the network properties to accommodate resource sharing
and select the type of wireless network that you wish to install. The MagicLAN can easily be
installed and used, without bothering to connect cables for keeping your computer to use
network resources, as in case of a wired LAN.

2.1 What is in Your Package?

Please check the contents of the box to make sure everything is included and ready for use.
Here is the list of what you should have in your package:
• SWL-2100N (PCMCIA Card) Adapter or SWL-2100P (PCI Card) Adapter
• SWL-2100X Installation CD
• External Antenna (for SWL-2100P only)

2.2 System Requirement

• Operating System: MS Windows 95(OSR2)/98, Windows NT 4.0
• Computer System (both Notebook and Desktop) with a CD-ROM drive
• For Desktop PC Adapter Card (SWL-2100P):
The computer system should have two free (extra) IRQs and I/O address.
• For Notebook PC Adapter Card (SWL-2100N):
The computer system should have PCMCIA Type II or Type III card slot. Notebook PC
should also have an extra IRQ and I/O address.
Important: Notebook PC must support 3.3V Card. If you are not aware of this issue,
please contact your dealer. Some old Notebook PCs may not support 3.3V Card.
10