Specifications - Water Ace R33SU-01 Owner's Manual

READ AND FOLLOW
SAFETY INSTRUCTIONS!
Carefully read and follow all safety instructions in this
manual and on pump.
This is the safety alert symbol. When you see this
symbol on your pump or in this manual, look for one of
the following signal words and be alert to the potential for
personal injury.
warns about hazards that will cause serious
personal injury, death or major property damage if ignored.
warns about hazards that can cause serious per-
sonal injury, death or major property damage if ignored.
warns about hazards that will or can cause
minor personal injury or property damage if ignored.
The label NOTICE indicates special instructions which are
important but not related to hazards.
Keep safety labels in good condition.
Replace missing or damaged safety labels.
DESCRIPTION
These Submersible Utility Pumps are designed for draining
water from basement floors, stock tanks, window wells, boats,
flat roofs and cisterns. The units are equipped with a 3-prong
grounding-type power cord. The shaded-pole motors are oil
filled and sealed for cooler operation. The sleeve bearings on
the motor shaft never need lubrication. Automatic reset ther-
mal protection.
NOTICE: This unit is not designed for applications involving
salt water or brine! Use with salt water or brine will void
warranty.

SPECIFICATIONS

Power supply required.......................................115V, 60 HZ.
Liquid Temp. Range ......................... Less Than 120°F (50°C)
Individual Branch Circuit Required (min.)..................15 Amps
Pump Discharge: ................................................1-1/4" NPT
Adapter:...................................................3/4" Garden Hose
Risk of fire or explosion. Do not use in explo-
sive atmospheres. Pump water only with this pump.
PERFORMANCE
Model 0' (0)
R33SU-01 2,160 (8,160)
WA861
TOTAL LIFT IN FEET (M)
CAPACITY IN GPH (LPH)
5' (1,5) 10' (3,0)
1,740 (6,600) 1,620 (6,120)
2
ELECTRICAL & SWITCH SPECIFICATIONS
Model
No. HP
R33SU-01 1/3
GENERAL SAFETY INFORMATION
Electrically powered utility pumps normally give many years of
trouble-free service when correctly installed, maintained, and
used. See the "Troubleshooting Chart" in this manual for
information about common utility pump problems and reme-
dies. For more information, see your retailer, or call the
Consumer Hotline at 1-800-942-3343.
1. Know the pump application, limitations, and potential
hazards.
2. Do not use in water where fish are present.
3. Disconnect the power before servicing.
4. Release all the pressure within the system before servicing
any component.
5. Drain all the water from the system before servicing.
6. Secure the discharge line before starting the pump. An
unsecured discharge line will whip, possibly causing per-
sonal injury and/or property damage.
7. Check hoses for a weak or worn condition before each use,
making certain that all connections are secure.
8. Periodically inspect the pump and the system components.
Keep free of debris and foreign objects. Perform routine
maintenance as required.
9. Provide a means of pressure relief for pumps whose dis-
charge line can be shut-off or obstructed.
10. Personal Safety:
a. Wear safety glasses at all times when working with
pumps.
b. Keep work area clean, uncluttered and properly lighted
– replace all unused tools and equipment.
c. Keep visitors at a safe distance from work area.
d. Make workshop child-proof – with padlocks, master
switches, and by removing starter keys.
11. When wiring an electrically driven pump, follow all of the
electrical and safety codes that apply.
15' (4,6)
1,260 (4,790)
Motor Individual
Full Load Branch Circuit
Amps Req. (Amps)
10.0 15
20' (6,1) 25' (7,6)
720 (2,700) 60 (240)