Flash Button; Sensitive Mode; Express Mode - Remington i-Light Smooth Sense User Manual

Power Mode (Default Mode)
Power Mode will provide the highest power level that is
appropriate for you. This mode is ideal for treating both
larger and smaller areas. Power Mode will give you the
best hair removal results in fewer treatments, but may
be less comfortable. Power mode is the default setting
when the unit is turned on. The light on the power mode
button will be illuminated when this mode is selected.

Flash Button

The Power Mode button also doubles as the Flash Button. This
button should be pressed to initiate a flash, regardless of the
power mode selected.

Sensitive Mode

Sensitive Mode is for those who find the Power Mode to be too
intense. Sensitive Mode is a less powerful mode available for
those who are sensitive to the discomfort but still wish to remove
unwanted hair. With this mode you may have to do a few more
treatments to see desired results.

Express Mode

Express Mode provides the user with a time friendly option for treatments. You may treat
larger areas with this mode at a faster rate, however it may be less effective and could require
additional treatments to see the desired results.
NOTE: Whenever the device is turned on it automatically defaults to Power Mode (Full Power).
• If you wish to select an alternative mode, press and hold the desired button to illuminate it.
• Once you have decided and selected the operating mode that is right for you, put the
treatment window firmly against your skin.
• Once the skin contact sensors are in full contact with the skin the Flash Button light will
pulse and you will hear a ticking sound to indicate that the unit is ready to give off a flash,
regardless of which operating mode is selected.
• The device is now ready to trigger the first flash. To deselect Sensitive or Express Modes,
simply press and hold the selected button again and the unit will revert back to Power Mode
with only the Flash Button illuminated.
Fig 11
Fig 12
13