Advertisement
ROUBLESHOOTING
Review this chart to find do-it-yourself solutions for minor performance problems.
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result
in electrical shock or personal injury from cleaner suddenly starting.
I=11=
I:]Ul :I
:1
Cleaner won't run.
Poor job of dirt pick-up.
Cleaner picks up
moveable
rugs or
pushes too hard.
Light won't work.
Dust escapes the
paper bag.
I. Unplugged at walloutlet.
2. Trippedcircuit breaker/blown
fuseat householdservice p anel.
3. On/Off switch notturnedON,
4. Suctionmotor reset tripped.
I. Full o rclogged dustbag.
2. Wrong pile height setting,
3. Worn brush.
4. Clogged nozzle hose,
5. Clogged hose orwand.
6. Holeinhose.
7. Brokenbelt.
8. Hose notinserted f ully.
9. Crevicetool left o n wand.
I. Wrong pile height setting.
I.
Plug in firmly, push OnlOff switch
to ON.
2.
Reset circuit breaker or replace
fuse.
,3. Push On/Off switch to ON.
4.
Remove clogs and reset, (pages I 1
and 15).
I.
Change bag, (pages 9 and I0).
2. Adjust setting, (page 6).
3.
Replace brush, (pages 1I- 13).
4.
Clean nozzle hose, (page 15),
5.
Clean hose, (page 15).
6.
Replace hose.
7.
Replace belt, (pages 1I-13).
8.
Inserthose, (page 3).
9.
Remove wand and properly store.
I.
Adjust setting. (page 6).
I. Burned outlight bulb,
I. Change light b ulb, (page 14).
,
2.
3.
Check forproperinstallation
ofbag.
Bag torn.
Bag cover improperly i nstalled.
I.
Check instructions,(pages 9 and 10).
2.
Replace bag.
3.
Check instructions,(pages 9 and 10).
16
Advertisement
