Advertisement
IGHTBULBCHANGING
NOTON ALLMODELS
ElectricalShock Or PersonalInjuryHazard
Disconnect electrical supply before servicingor
cleaning the unit. Failureto do socould resultin
electrical shock or personal injuryfrom cleaner
suddenlystarling.
Disconnect
electrical
supply.
The handle must be pulled down and the cleaner
turned over.
Release the lower plate by pushing the tabs in
toward the center.
Grasp the clips at the back and pull forward and up
to remove the lower plate.
With the lower plate off the bulb housing can be
pulled off the flange it is mounted
to by wiggling the
socket back and forth,
Bulb Housing
With the bulb housing loose the bulb can be
removed
by pushing in and twisting it counterclock-
wise. The new bulb can be placed
in the socket, J_ine
up the post on the bulb with the slots in the socket
and while pushing the bulb ir_to the socket, twist the
bulb clockwise.
(NOTE: See page 3 for Bulb #,)
Replace the lightbulb withthe same or smaller
wattage sizeto prevent damage to surrounding
parts.
Reinsert the bulb housing onto the flange by pushing.
down.
Reinstall the lower plate by placing the front tabs on
the plate into the slots on the nozzle housing and
pushing the plate to the rear until the back clips snap
into place, Push the tabs to the outside.
14
Advertisement
