Nuvair PRO TRIMIX Quick Start Manual

Helium/oxygen mixture analyzer

Advertisement

QUICK START GUIDE
FOR
PRO TRIMIX
HELIUM/OXYGEN
MIXTURE ANALYZER
P/N He/O2
Rev 1
DANGER
This instrument is designed to monitor the helium and oxygen concentrations in a gas
mixing process. When processing gas mixtures intended for breathing, the instrument
must be calibrated and functioning properly. Suffocation or other fatal respiratory
complications can result from improperly calibrated or malfunctioning equipment.
Oxygen accelerates combustion. Do not use this instrument around open flames and
combustible gases, liquids or solids.
Only authorized personnel should conduct maintenance and/or servicing. Before
conducting any maintenance or servicing, consult with authorized
supervisor/manager.
Nuvair- 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO TRIMIX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nuvair PRO TRIMIX

  • Page 1 QUICK START GUIDE PRO TRIMIX HELIUM/OXYGEN MIXTURE ANALYZER P/N He/O2 Rev 1 DANGER This instrument is designed to monitor the helium and oxygen concentrations in a gas mixing process. When processing gas mixtures intended for breathing, the instrument must be calibrated and functioning properly. Suffocation or other fatal respiratory complications can result from improperly calibrated or malfunctioning equipment.
  • Page 2: Installing The Sensor

    Quick Start Guide for Pro Trimix Helium/Oxygen Mixture Analyzer Thank you for purchasing Nuvair’s PRO TRIMIX Helium/Oxygen Analyzer. This Quick Start Guide describes the steps to successfully install, calibrate and use your new instrument. This guide covers both the wall-mount and portable units with and without oxygen analysis. For full details on the use and maintenance of your new instrument please refer the Users Manual.
  • Page 3: Gas Connections

    30 days. For calibration information please refer to the instruction manual. Operation To operate the PRO TRIMIX 1. Turn the power on. 2. Attach the sample line using the supplied adapters and allow the gas to flow into the instrument at 1-2 LPM.
  • Page 4 2949 West 5 Street Oxnard, CA 93030 Ph. 1-805-815-4044 Fax 1-108-815-4196 www.nuvair.com Revision 08-01-2007 Nuvair- 4...

Table of Contents