Nuvair PRO HE Quick Start Manual

Helium analyzer

Hide thumbs Also See for PRO HE:

QUICK START GUIDE

FOR

PRO HE

HELIUM ANALYZER

P/N He-CS

Rev 2

DANGER

This instrument is designed to monitor the helium concentrations in a gas mixing

process. When processing gas mixtures intended for breathing, the instrument must

be calibrated and functioning properly. Suffocation or other fatal respiratory

complications can result from improperly calibrated or malfunctioning equipment.

Oxygen accelerates combustion. Do not use this instrument around open flames and

combustible gases, liquids or solids.

Only authorized personnel should conduct maintenance and/or servicing. Before

conducting any maintenance or servicing, consult with authorized

supervisor/manager.

Nuvair- 1

Table of Contents

Need help?

Do you have a question about the PRO HE and is the answer not in the manual?

Page 1 QUICK START GUIDE PRO HE HELIUM ANALYZER P/N He-CS Rev 2 DANGER This instrument is designed to monitor the helium concentrations in a gas mixing process. When processing gas mixtures intended for breathing, the instrument must be calibrated and functioning properly. Suffocation or other fatal respiratory complications can result from improperly calibrated or malfunctioning equipment.
Page 2: Battery Installation
Quick Start Guide for Pro He Helium Analyzer Thank you for purchasing Nuvair’s PRO HE Analyzer. This Quick Start Guide describes the steps to successfully install, calibrate and use your new instrument. This guide covers both the wall-mount and portable units. For full details on the use and maintenance of your new instrument please refer the Users Manual.
Page 3 30 days. For calibration information please refer to the instruction manual. Operation To operate the PRO HE 1. Turn the power on. 2. Attach the sample line using the supplied adapters and allow the gas to flow into the instrument at 1-2 LPM.