Table of Contents
Advertisement
3. Adjusting the lens
Image 3-2
2. Use the tool in the adjustment hole.
Image 3-3
3. Make sure that the lens stays in focus while zooming.
4. Fix the 4 screws.
3.2
Shift/Zoom/Focus
Description
The shift adjustment is done during the Installation phase.
The other adjustments possible on the lenses are:
•
Motorized Zoom
•
Motorized Focus : should be done during the installation phase
•
ECR (Extended Contrast Ratio) : ECR is done through automatic adjustment of the lens opening (aperture).
How to shift via the RCU (or keypad)
1. Press LENS SHIFT on the RCU
10
R59770110 QSD LENSES 25/02/2008
Advertisement
Table of Contents
