Table of Contents
Advertisement
2. Installing the lens
Image 2-2
Lens mounting on the projector's lens holder : the mounting points are shown.
How to mount the projector ?
1. Slide the lens over the 3 rods.
2. Put a washer (diameter 6.4mm) and a nut M4 on each rod.
Image 2-3
Lens mounting on the projector's lens holder : washer and nuts.
3. Fix the nuts until the lens flange touches the x-plate at the 3 fixation points (nominal position).
4. Loosen each nut 1 turn to make it possible to start adjusting the lens.
How to put the lens covers?
1. Put the lens bottom cover plate and tighten the 3 screws.
6
R59770110 QSD LENSES 25/02/2008
Advertisement
Table of Contents
