Advertisement
ASSE
BLY/PRE-OPERATION
iNSTALL
CHUTE DEFLECTOR
REMOTE
CONTROL
(See Figs. 8 and 9)
1.
Install remote cable bracket to discharge chute with
5/16-18 carriage bolt and 5/16-18 Iocknut as shown.
Tighten securely.
2.
Install remote cable eyelet to chute deflector with
1/4-20 shoulder bolt and 1/4-20 Iocknut as shown.
Tighten nut securely. Cable eyelet will be loose on
shoulder bolt.
3.
Install spring hooks between hex nuts on chute rotater
head and into hole in chute deflector as shown.
CHECK TiRE PRESSURE
The tires on your snow thrower were overinflated at the fac-
tory for shipping purposes. Correct and equal tire pressure
is important for best snow throwing performance.
•
Reduce tire pressure to 14-17 PSI.
1/4-20
SPRING
CHUTE
SHOULDER
DEFLECTOR
1/4-20
LOCKNUT
f_
5/16-18
CARRIAGE
CABLE
EYELET
REMOTE
/
CABLE
/
BRACKET
5/16-18
LOCKNUT
FIG. 8
CHUTE DEFLECTOR
CONTROLLEVER
FIG, 9
8
Advertisement
