Unitech MS380 Quick Reference Manual

General Setting
Default
Check Version
Quick Connection
Step 1 - Connect the cradle to the host computer.
Step 2 - Activate the scanner
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Tel: + 886 2 89121122 Fax: +886 2 89121810
Device Manager will show "USB Human Interface Device", and if you
double click it, it will show "Wireless Base" on its properties window.
Press and hold the trigger for
1 second until a beep sounds.
website: www.ute.com
MS380 Wireless Scanner
Quick Reference Guide
LED Indication
Off -- Ready for scanning or no
power
Blue -- Good reading
BlueRed -- Disconnection
Beeper
Long Beep -- Power ON
Short Beep -- Good read
2 Beeps -- Connection or successful
setup
3 Beeps -- Disconnection or error
Step 3 - Wait for connection
The blue LED indicator on the cradle will turn on to
verify a successful connection to the scanner.
Caution: If the cradle fails to connect the scanner,
please follow the instruction of WIRELESS
CONNECTION OPTIONS section.