Setting Squelch Level; Transmitting Limit Time - Radioddity GD-55 Plus User Manual

Receiving frequency
1. Press [ ] key to ent er the menu mode.
2. Press [ or ] key to Set ti ngs, and then press [
3. Press [ or ] key to radi o conf i gurat ion, and then press [
4. Press [ or ] key to receiving frequency, and then press [
5. The screen displ ays transmi t ting frequency of the current channel , and then press
[ ] key to sel ect .
6. Press the number keys to ent er the correspondi ng number, press [
the last number, press [ ] to ret urn to the previous menu.
7. Af ter fini sh the change, press [ ] key, the screen displ ays transmi t ti ng frequency
has been saved.
Note: Editing frequency will belimited within the frequency range set ted by programming
software, ifless than the write frequency range setted by sof tware, the final change result
will be the mini mum frequency of frequency range set ted on software, otherwi seitis
maximum.
Channel name
1. Press [ ] key to ent er the menu mode.
2. Press [ or ] key to Settings, and then press [
3. Press [ or ] key to radio confi guration, and then press [
4. Press [ or ] key to the channel name and press [
5. The screen displays the current channel name, press the [
method to enter the rel evant letters, numbers or characters, the same as the inputmet
41
] key to select .
] key to select.
] key to select.
] key to delete
] key to select .
] key to select .
] key to select .
] key to switch the input
hod fortex tediting.
6. Af ter the change is compl et ed, press [
been saved.

Setting Squelch level

You can adjust radio's squelch level, thus filtering low signal intensity useless call or
channels which background noise higher than normal value.
Setting: Normal is the default, strict filtering (useless) call or background noise. However,
a call from a remote location may also be filtered out.
Using the menu function:
1. Press [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [
3. Press [ or ] key to radio settings, and then press [
4. Press [ or ] key to squelch level, and then press [
5. Press [ or ] key to choose the level from 0 to 9, and then press [
6. The screen returns to the previous menu.

Transmitting limit time

1. Press [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [
3. Press [ or ] key to radio configuration, and then press [
4. Use the keypad to enter the correct radio configuration password (programmed by
software), and then press [ ] key to select.
] key, the screen displ ays channel name has
] key to select.
] key to select.
] key to select.
] key to select.
] key to select.
] key to select.
42