Monitor; Start Monitor; Group Call With Contacts; Private Call With Contact - Radioddity GD-55 Plus User Manual

Monitor

Using monitoring function to open the target two way radio microphone ( only the user
alias or ID ). You can use the function to monitor any sound around target two way radio.
You must allow your two way radio to use this function by programming it.
This function only apply to private call

Start Monitor

Using the Menu:
1. Press [ ] to enter the menu
2. Press [ or ]key to select Contacts, then press [
3. Press [ or ] to the required user alias or ID, then press [
4. Press [ or ] to select Remote Monitor then press [
5. Two way radio makes a prompt sound.
6. Waiting for confirmation
7. Screen displays Monitor successed,
Or screen displays Monitor failed
8. If successed: two way radio began to receive voice signals from the radio which are
being monitored voice and screen displays two way radio are monitoring, until the end of
the duration of the preprogrammed, two way radio made a prompt sound, and the LED
light puts out, screen display that monitoring ends.
If failed: two way radio repeats until reach the preprogrammed attempts.
Contacts
23
]key to select.
]key to select
] to select
Contacts is "address book" for handheld two way radio. Each entry correspond to an alias
or ID used to start the call. In addition, each item, according to the different content setting,
relate to there types of call: group call, single call, all call. Your radio support digital
address booking.

Group Call with Contacts

Note: the difference between private call icon, group call icon and all call icon
1. Press [ ]key to enter Menu
2. Press [ or ] to contacts, then press [
order.
3. Press [ or ] to required calling groupís alias or ID.
4. Hold the radio and let it in a vertical position and keep mouth 1 to 2 inches (2.5 to 5.0cm)
with radio.
5. Press [PTT] key to start calling, the LED light turns red. The screen displays the calling
group's alias or ID.
6. Releasing [PTT]key to receive, when any user response within the group, the LED light
turns green. You will see on screen group call icon of user 's ID
7. If you enable the "Channel Free Prompt" function, when the target radio release the
[PTT]key, you will hear a short beep, said this channel is idle, waiting for your answer.
Press the call key (PTT) to answer. If in a preprogrammed group called hang time without
voice activity, the call is ended.
Private Call with
] to choose, entries arrange in alphabetical
24