Editing Message; Check The Sent Message; Send The Sent Message - Radioddity GD-55 Plus User Manual

Editing message

Choosing edit to edit message before you edit.
Note: if you have a subject line (receive text messages from email program ), you can't
edit the subject line.
1.Press key to edit, then press [ or
2. A flashing cursor appears, using the keyboard to input messages, press [
move to the left one, press[ ]button to the right one, when editing area have content ,
press the [ ] key to delete any useless character, otherwise when editing area without
content to return to the higher level menu.
3. After writing the text, press [ ] choose to send or save
4. After choose send, press [ or ] to required alias or ID, and then press [
choose.
5.Screen displays message: < user/group name or ID > call, to confirm text messages
were being sent
6. If the messages sent successfully, the screen will displays text message has been sent.
Manage the Sent SMS
Once a message is sent to another radio, it will be saved in the "Outbox". Send after
sending a text message has always been to "Outbox" at the top of the list. The "Outbox"
folder can store up to 20 recently send text messages. After the folder is full, the next
send text messages will automatically replace the earlier messages in this folder.
Note: at any time pressing the [ ] key can return to the previous screen.
29
] key to choose
] key to

Check the sent message

Using the menu function:
1. Press [ ] button to enter the menu mode.
2. Press [ or
3. Press [ or
4. Press [ or
the message from the email program, a subj ect lines will appear, in the top right corner
of the screen icon indicates state of SMS.

Send the sent message

When the view sent messages, you can choose the following options:
]key to
Resend
Forward,
Edit
Delete
1. Check the message, press [
2. Press the [
3. The screen displays: < user/group name or ID > call, confirm that it is preparing to send
the same message to the same target radio
4. If the messages sent successfully, the screen will displays text message has been sent.
Select contacts, send the required message to user/group name or ID.
Select edit, editing the required message before send,
] the key to message, and then press [
] to Outbox, and then press [ ] key to choose
] the key to the required message, and then press [
] key again
or ]key to resend, then press [ ] key to choose.
] key to choose
] key choose. If
30