Inserting Bobbin - Kenmore 385.12912 Owner's Manual

,, Inserting bobbin
[] Place a bobbin in the bobbin case making sure
thread feeds clockwise coming from the bobbin
[] Draw lhe thread through the slot of case
[] Continue to draw the thread under the tension spring and
through the opening
Pull out abo5t 10 cm (4") of thread
[] Holding latch open, position the bobbin case into the
shuttle and release latch
[] Case should lock into place when latch is released°
[]
[]
[]
[]
, ,...'
#
[]
...,.,
22