Getting Ready To Sew Connecting Machine To Power Supply; For Your Safety; Operating Instructions; Controliing Sewing Speed - Kenmore 385.12912 Owner's Manual

Sears sewing machine user manual
Table of Contents

Advertisement

SECTKON IL GETTING
READY TO SEW
Connecting
Machine
to Power
Supply
(D Power supply plug
_) Power switch
(_) Outlet
(_) Machine socket
(_) Machine plug
(_)Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power
1. Turn off the power switch(_)
2o Insert the machine plug (_) into the machine socket (_),
3,, Insert the power supply plug O into the outlet _
,,
4oTurn the power switch(_)to turn on the power and
sewing light (_),
For Your Safety
* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts such as the thread
take-up lever, handwheel or needle.
*Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended,.
- When attaching or removing any parts_
- When cleaning the machine.
* Do not place anything on the foot control, when not sewing,,
Operating
instructions:
"For appliances with a polarized plug (one blade
wider than the other)° To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way,
If it does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
power outlet. Do not modify the plug in any way,"
"Foot Controller Model YC-482J or TJC-150 is used with
Sewing Machine Models 385.12912 XXX and 385,,12916
XXX."
XXX - represents numbers 000 through 999°
Controlling
Sewing
Speed
Sewing speed can be varied by the foot control°
The harder you press on the foot control, the faster the
machine runs
r"
.....J

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

385.1291685.12916385.12916890

Table of Contents