Table of Contents
Advertisement
MAINTENANCE
E. REMOVING A USED HEPA FILTER
CARTRIDGE.
Replace filter when button pops up and shows red while
vacuuming. (Fig. 25) The Filter Cartridge should last for more
than a year when the machine is used for normal household
purposes.
1. Unplug the machine.
2. Rotate the Lock Tab at the rear of the Housing Cap to
unlock the Cap. (Figure 26)
3. Pivot the Cap up from the Lock Tab end and slide Cap
forward and off the Filter Housing. (Figure 27)
4. Grasp the Plastic Strap on the top of the Filter Cartridge and
pull up to remove the Cartridge. Discard Cartridge into a
trash can.
For a replacement cartridge, contact your nearest
authorized service center.
F. INSERTING A NEW HEPA FILTER
CARTRIDGE.
1. Unplug the machine.
2. When handling the new filter cartridge be very careful not to
damage or tear the pleated filter.
3. Slide the Cartridge down inside the Filter Housing until it
touches the bottom of the Housing. The arrow on the top of
the Cartridge must face the front of the Filter Housing.
4. Assemble the Housing Cap onto the Filter Housing by
reversing the procedure of paragraph E.3. That is, slide the
Housing Cap onto the front of the Filter Housing to engage
the underside lip of the Cap onto the small ledge at the top
front of the Filter Housing. (Figure 28) Once engaged, pivot
the Cap down onto the top of the Filter Housing and rotate
How to extend the life of your
HEPA Absolute Air filter
Your HEPA Absolute Air filter operates best when you use
it under normal household cleaning conditions like
vacuuming living rooms, hallways, bedrooms, kitchens,
etc.
CAUTION: If you leave the HEPA filter cartridge in for
abnormal domestic cleaning chores, such as for
vacuuming ash from a fireplace or sawdust from a
carpentry work area, you will shorten the life of the filter.
To clean these areas use a dust pan and brush for the
excess dirt, then use the vacuum for the residue.
t
lib
[]
FIGURE25
i
FIGURE26
t.
FIGURE27
,1
FIGURE28
IIII
11
Hide quick links:
Advertisement
Table of Contents
